Char LCD 16x2

This is a great little LCD display. Built in RGB backlight LEDs. You can hardwire these with current limiting resistors to the color of your choice, or drive them with spare PWM pins to change the background color as needed. Driver operates in 4 or 8 bit Parallel data modes. Display is FSTN Positive (Background is RGB backlight color.) Requires 10k-20k potentiometer to drive and control contrast level.

Features:

Two line (2 x 16) characters

5x8 dots with cursor line

+5V supply

Red, Green and Blue Backlights

Parallel Interface 4/8 bit modes

Display mode: FSTN/Gray/Positive/Transflective

High operating temperature range: -20C - +70C

Driver: SPLC780D 4 or 8 bit modes (Compatible with Arduino LCD Library.)

Direct access to low level controller is available for advanced control.

Space reserved for eight custom characters.

Mechanical Specs

Module size: 80mm x 36mm x 13mm

Viewing area: 64.5mm x 16.4mm

Character size: 3mm x 5.23mm

Resources

Datasheet: NHD-0216K1Z-FS_RGB_FBW-REV1

SPLC780D Controller manual.